SleekAir extractor hood | A+++ | 717m³/h | touch | LED | 90cm short title: SleekAir extractor hood
- This item is not in stock and must be reordered. In stock and ready for you! Order now and enjoy your purchase without delays. This item is currently out of stock. Leave us your email and we’ll notify you once it’s available!
- 14 day cooling off period
Top features
Clears cooking smells before they spread: With an airflow rate of 717 m³/h in Boost mode, the Klarstein SleekAir captures grease, steam, and odours at the hob — so they never get the chance to settle into your walls, cabinets, or soft furnishings.
Quiet enough to hold a conversation: At a maximum of 39 dB during normal operation, the hood runs unobtrusively in the background — you can cook and chat without raising your voice. The 123 W DC motor offers three speed settings plus Boost for when you need it.
Low-effort maintenance: The aluminium grease filter goes straight into the dishwasher — no scrubbing required. For recirculation mode, the activated charcoal filter (2-pack) simply needs swapping out every 3–6 months.
See what you're cooking: The integrated 1 × 3 W LED light illuminates your hob clearly, with three selectable colour temperatures — 3,200 K for warm light, 4,200 K for neutral, or 6,500 K for a bright daylight tone — all while using far less energy than a traditional halogen bulb.
Designed to fit the way modern kitchens look: The angled front panel — available in safety glass or stainless steel — sits flush against your wall and mounts 65–75 cm above the hob for optimal extraction. It replaces a bulky chimney hood without major installation work, and stainless steel surfaces wipe clean with a damp cloth.
Product description
Every kitchen tells a story — but lingering fry smells and greasy steam on your walls and cabinets aren't the part worth keeping. The Klarstein SleekAir angled cooker hood pulls up to 717 m³/h of air through its filters, catching cooking odours, grease, and steam at the source before they have a chance to settle anywhere. The sleek angled design — available in safety glass or stainless steel — slots into a modern kitchen without the bulk of a traditional chimney hood.
The 123 W DC motor runs across three speeds plus a Boost mode, yet stays remarkably quiet in day-to-day use — a maximum of 39 dB in normal operation, which is quieter than a relaxed conversation in the same room. The angled extraction surface channels airflow directly into the filters regardless of where you mount it. For best results, fit the hood 65–75 cm above your hob.
The single-stage aluminium grease filter traps fat particles right where they're produced and is fully dishwasher-safe — no scrubbing, no costly replacement filters to worry about. The built-in LED light (1 × 3 W) illuminates your hob in three colour temperatures — 3,200 K, 4,200 K, or 6,500 K — using a fraction of the energy of a halogen bulb.
If you prefer recirculation mode, an activated charcoal filter (sold as a 2-pack) does the job, with a recommended replacement every 3–6 months. The automatic run-on function keeps the fan going for 3 minutes after you've finished cooking, then shuts off on its own.
Energy efficiency class A+++ keeps running costs low for a hood you'll use every single day. Whether you're renovating your kitchen or finally replacing a tired old extractor, the SleekAir is an upgrade that pays for itself in fresher air and lower energy bills. Order yours today and enjoy a cleaner kitchen from the very first meal.
Features
- Airflow capacity: approx. 717 m³/h (Boost mode)
- Energy efficiency class: A+++
- Motor type: DC
- Motor power: 123 W
- Controls: touch
- Operating mode: extraction + activated charcoal filter (recirculation)
- Fan speeds: 1–3 + Boost
- Noise level in Boost mode: 67 dB
- Maximum noise level (normal operation): 39 dB
- Grease filter: aluminium, single-stage, dishwasher-safe
- Activated charcoal filter: 2-pack, replace every 3–6 months
- Extraction duct diameter: 150 mm
- Duct size: 300 + 300 mm
- Lighting: 1 × 3 W LED
- Light colour temperatures: 3,200 K / 4,200 K / 6,500 K
- Automatic run-on: 3 minutes
- Hood type: angled cooker hood with inclined front panel
- Suitable for: modern kitchens, family kitchens, kitchen runs, kitchen islands
- Installation tip: mount the hood 65–75 cm above the hob surface — clean stainless steel surfaces with a damp cloth
- Wall mounting: angled hood fixed to the wall 65–75 cm above the hob
Dimensions and Technical Details
- Product dimensions: 90 x 35 x 38.5 cm (WxDxH without flue)
- Weight: 14.8 kg
- Minimum height to ceiling: 65 cm
- Maximum height to ceiling: 75 cm
- Cable length: 1.75 m
What will be delivered?
- 1 x extractor hood: 1
- 1 x flue cover: 2
- 1 x non-return valve (consisting of 2 parts)
- 1 x activated carbon filter set (consisting of 2 parts)
- Mounting material
- Multilingual operating instructions
Delivery & shipment
