Zelda 90cm 600.9m³/h Chimney Cooker Hood​ Silver

• Clears the air across the whole kitchen: At up to 650 m³/h, the Klarstein Zelda 90 pulls cooking fumes, airborne grease, and food odours away from the hob before they spread through the room.

• Right power for whatever you're cooking: Three fan speeds let you dial in the extraction to suit the moment — quiet enough for a slow simmer, powerful enough for a full roast. The motor draws 193 W, running only as hard as it needs to.

• Cleaning takes seconds, not an afternoon: All three aluminium grease filters slide out without tools and go straight into the dishwasher — back in place and ready to go with minimal effort.

• See what you're doing, even on busy nights: Integrated LED lights cast even, consistent light across the hob, and the backlit touch panel lets you adjust speed, toggle the light, and set the 5-minute run-on timer without breaking your stride.

• Fits your kitchen, whatever the ceiling height: The telescopic chimney adjusts between 40 and 75 cm to suit different room heights. No extraction duct? Fit an optional activated charcoal filter and run it in recirculation mode instead.

There's nothing worse than last night's stir-fry still lingering in the hallway the next morning. The Klarstein Zelda 90 puts a stop to that — extracting cooking fumes, grease particles, and kitchen odours before they ever get a chance to settle. With a maximum extraction rate of 650 m³/h and a sleek stainless steel chimney housing, this wall-mounted cooker hood is built for kitchens that actually get used.

Three extraction speeds let you match the power to what's on the hob — a gentle simmer calls for something quite different from a high-heat sear. The built-in LED lighting gives you a clear, even view of the cooking surface, while the backlit touch panel puts everything at your fingertips: fan speed, light, and a 5-minute run-on timer for automatic post-cooking ventilation.

The telescopic chimney adjusts to ceiling heights between 40 and 75 cm, so it fits neatly whether your kitchen has high ceilings or not. If your kitchen doesn't have an existing extraction duct, the Zelda 90 can also run in recirculation mode with an optional activated charcoal filter. The three aluminium grease filters lift straight out and go in the dishwasher — no tools, no fuss, no engineer needed.

The Klarstein Zelda 90 is a no-nonsense choice for any kitchen with a wall-mounted extraction setup. Solid performance, straightforward maintenance, and a finish that suits both contemporary and classic kitchen designs. It should be mounted 65–75 cm above the hob for best results, and the stainless steel surface wipes clean with a damp cloth.

Give your kitchen the extraction it deserves — order the Klarstein Zelda 90 today and breathe a little easier.

• Energy efficiency class: B
• Two-part stainless steel chimney housing, height-adjustable from 40 to 75 cm
• Run-on timer: 5-minute auto shut-off for continued ventilation after cooking
• 3 aluminium grease filters, dishwasher-safe and easy to remove
• Installation kit included: wall brackets, rawl plugs, and screws
• Total power consumption (light on, highest extraction speed): 213 W
• Power supply: 220–240 V~ | 50/60 Hz
• Type: wall-mounted chimney cooker hood
• Max. extraction rate: 650 m³/h
• Motor power: 193 W
• Width: 90 cm
• Controls: backlit touch panel — fan speed, lighting, and run-on timer
• Activated charcoal filter: retains odours in recirculation mode (optional accessory, sold separately)
• Suitable for: modern and classic kitchens, wall-mounted installation, family kitchens
• Key benefits: reliable extraction performance · quiet operation · contemporary design · energy-conscious · easy maintenance
• Installation note: mount 65–75 cm above the hob for optimum extraction — stainless steel surface cleans with a damp cloth
• Recirculation mode: can be used without an extraction duct when fitted with an activated charcoal filter
• Grease filters: dishwasher-safe aluminium filters, tool-free removal

• Dimensions (without flue duct): approx. 90 x 50 x 35 cm (WxHxD)
• Dimensions (flue, one part): approx. 22 x 40 x 17 cm (WxHxD)
• Height of flue: approx. 40 - 75 cm
• Exhaust hose diameter: 150 mm & 153 mm (Ø)
• Length of power cable: approx. 1.40 m
• Weight: about 10 kg