Ich bin und bleibe eine Frostbeule. Mir ist ständig kalt, selbst jetzt, wo wir doch einen sehr milden Winter haben. Zum testen bekam ich den Klarstein HT00 6GL / 7GL Design Konvektor und dieser wurde nun einige Wochen ausgiebig getestet. Der Konvektor kostet derzeit auf Amazon 89,90 Euro.
Als ich den Konvektor auspackte dachte ich im ersten Augenblick es handelt sich um einen Fernseher. Auf den ersten Blick sieht es wirklich so aus. Mit den Standfüßen hat er eine Größe von 54 x 55 x 22 cm. Mit in Lieferumfang dabei sind auch sämtliche Schrauben und Dübel, falls man das Gerät an der Wand anbringen möchte. Auch eine gute Idee, aber ich möchte ihn immer mal gerne woanders aufstellen und so habe ich das nicht genutzt. Es handelt sich hierbei um eine sehr große Glasplatte in schwarz mit einem eingebauten Heizstrahler. Sehr erstaunt war ich darüber, dass man auf der Glasplatte so gut wie keinen Fingerabdruck sieht, wenn man das Gerät anfasst.
Auf der rechten Seite befindet sich das Bedienelement. Hier habe ich zum einen das Display, wo alles sehr gut angezeigt wird. Darunter befinden sich die Bedienelemente. Hier habe ich zum einen den Ein- und Ausschalter, die Taste um die Uhrzeit einzustellen, die Programmeinstellung, die Temperatur Einstellung, Eingabe bestätigen oder Menü aufrufen sowie zwei Tasten um einmal den Wert zu erhöhen oder zu verringern.
Der Aufbau ist wirklich Kinderleicht. Ich muss nur die Standfüße mit den Schrauben an der Unterseite des Gerätes anschrauben und das ganze auf einer ebenen Fläche abstellen. Stecker in die Steckdose und fertig. Aber auch die Inbetriebnahme ist einfach. Ich schalte das gerät ein und stelle den Schalter auf Position "I". Nun drücke ich die Standby Taste und verlasse diesen Modus und schon wird mir auf dem Display die aktuelle Temperatur im Raum und die Uhrzeit angezeigt.
Ich habe hier verschiedene Heizmodi zur Verfügung. Zum einen den freien Heizmodus. Aber selbst dieser ist noch in Unterschiedlichen Heizfunktionen unterteilt. Zum einen habe ich hier den Modi Komfort. Mit dieser Funktion wird der Raum auf eine gewünschte Temperatur aufgeheizt. Hier kann ich selber die Gradzahl auswählen mit den Pfeiltasten. Weiterhin gibt es den Spar Modi. Mit dieser Funktion wird die eingestellte Temperatur gehalten. Sollte die Temperatur fallen, schaltet sich das Gerät Automatisch in den Komfort Modus, bis der Raum wieder die Temperatur hat. Und dann gibt es noch den Modi Frostfrei. Dieser Modus ist dafür geeignet eine Mindesttemperatur von 5 Grad zu halten.
Allerdings muss ich bei diesem Gerät jeden Tag aufs neue alles Programmieren. Es wird nichts gemerkt und ich kann auch nicht für eine ganze Woche alles einstellen. Auch eine Zeit oder einen Wochentag kann ich nicht direkt eingeben. Auf dem Display gibt es einen Uhrenkreis und einen Datumskreis. Ich musste ein wenig herumprobieren die ersten Tage bis ich wirklich den Dreh raus hatte, wie das ganze funktioniert. Es liegt zwar eine Anleitung dabei, die auch verständlich ist, aber wenn man dann vor dem Gerät sitzt, ist es doch was anderes. Insgesamt hat man hier in dem Kreis eine 24 Stunden Skala. Diese ist durch Vierecke gekennzeichnet und jedes Viereck entspricht 30 Minuten. Wenn ich nun Programmieren möchte wähle ich erst einmal den Wochentag aus. Dies geschieht mit Hilfe der Pfeiltasten. Nun drücke ich die Taste Programm um das ganze zu bestätigen. Mit den Pfeiltasten stelle ich nun die gewünschte Funktion ein und mit der 24 Stunden Skala die gewünschte Dauer. So habe ich die Möglichkeit zum Beispiel von 6-12 Uhr die Komfort Funktion zu wählen und von 12-18 Uhr die Spar Funktion.
Mit diesem Konvektor kann ich einen Raum bis 40 Quadratmeter gut aufheizen und man spürt auch die Wärme. Es ist eine sehr angenehme Wärme und das Gerät arbeitet auch völlig lautlos. Das Display ist schön blau beleuchtet, so dass man es auch im dunkeln sehr gut erkennen kann, es aber nicht störend wirkt. Die Bedienelemente sind ein Touchpanel und reagieren sofort, wenn man mit dem Finger kurz drauf tippt. Das Sicherheitsglas wird etwas warm, aber nicht heiß so das man sich die Finger verbrennt. Ich kann es ohne Probleme anfassen ohne das etwas passiert.
Sehr schön ist auch, dass das Gerät nach 10 Sekunden ohne drücken einer Taste in den Kindersicherungsmodus geht. Der Stromverbrauch liegt bei 230V. Aber da man das Gerät ja nicht ständig an hat, finde ich das ganz Ok. Muss jeder für sich entscheiden und ich kann auch nicht den kompletten Stromverbrauch angeben, denn es hängt ja immer davon ab, wie lange man dieses Gerät benutzt.
Im Gegensatz zu einem normalen Heizkörper habe ich mit diesem Konvektor schon nach nur wenigen Sekunden einen warmen Raum. Ideal auch im Badezimmer, wenn man dort nicht den ganzen Tag die Heizung laufen lassen möchte, da doch die Heizkosten enorm sind. Konvektor so Programmieren das er morgens zu einer bestimmten Zeit in den Komfort Modus geht und ich habe es schnuckelig warm im Badezimmer. Ich kann also heizen wenn ich es brauche und es ist definitiv um einiges günstiger.
Und dann natürlich das Design. Optisch einfach der Knaller und ein Hingucker. Ich habe schon etliche Konvektor gesehen, aber die sahen alles andere als schick aus. Dieser hier sieht wirklich aus wie ein Fernseher auf den ersten Blick. Er sieht richtig edel und hochwertig aus und passt in jedes Zimmer. Das Design ist wirklich gelungen und auch die Verarbeitung ist absolut Top. Sowohl als Standgerät oder auch bei Wandmontage macht er ein gutes Bild.
Wir sind hellauf begeistert und vergeben fünf Sternchen dafür.
I am and will always be a frostbite. I'm always cold, even now that we're having a very mild winter. I got the Klarstein HT00 6GL / 7GL design convector for testing and it has now been extensively tested for a few weeks. The convector currently costs 89.90 euros on Amazon. When I unpacked the convector, at first I thought it was a television. At first glance it really looks like it. With the feet it has a size of 54 x 55 x 22 cm. The scope of delivery also includes all the screws and dowels if you want to mount the device on the wall. Also a good idea, but I always like to set it up somewhere else and so I didn't use it. This is a very large glass plate in black with a built-in heater. I was very surprised that you hardly see any fingerprints on the glass plate when you touch the device. The control element is on the right side. On the one hand I have the display, where everything is shown very well. Below are the controls. Here I have on the one hand the on and off switch, the button to set the time, the program setting, the temperature setting, confirm input or call up the menu and two buttons to increase or decrease the value once. The construction is really easy. I only have to screw the feet to the bottom of the device with the screws and place the whole thing on a flat surface. Plug into the socket and you're done. But commissioning is also easy. I turn on the device and set the switch to the "I" position. Now I press the standby button and leave this mode and the current temperature in the room and the time are shown on the display. I have different heating modes available here. Firstly, the free heating mode. But even this is divided into different heating functions. On the one hand I have the Comfort mode here. This function heats the room to a desired temperature. Here I can select the number of degrees myself with the arrow keys. There is also the economy mode. With this function, the set temperature is maintained. If the temperature drops, the device automatically switches to comfort mode until the room has the temperature again. And then there is the Frost Free mode. This mode is suitable for maintaining a minimum temperature of 5 degrees. However, I have to reprogram everything with this device every day. Nothing is noticed and I can't adjust everything for a whole week. I can't enter a time or a day of the week directly either. On the display there is a clock circle and a date circle. I had to try a little bit the first few days until I really got the hang of how it all works. There is a manual included, which is understandable, but when you sit in front of the device, it's something else. Overall, there is a 24-hour scale here in the district. This is marked by squares and each square corresponds to 30 minutes. If I want to program now, I first select the day of the week. This is done using the arrow keys. Now I press the program button to confirm the whole thing. I now set the desired function with the arrow keys and the desired duration with the 24-hour scale. For example, I can choose the comfort function from 6 a.m. to 12 p.m. and the economy function from 12 p.m. to 6 p.m. With this convector I can heat up a room up to 40 square meters and you can feel the warmth. It is a very pleasant warmth and the device also works completely silently. The display is illuminated in blue so that you can see it very well even in the dark, but it is not disturbing. The controls are a touch panel and react immediately when you briefly tap on them with your finger. The safety glass gets a little warm, but not hot enough to burn your fingers. I can touch it without any problems and nothing happens. It is also very nice that the device goes into child lock mode after 10 seconds without pressing a button. The power consumption is 230V. But since you don't have the device on all the time, I think it's okay. Everyone has to decide for themselves and I can't state the complete power consumption either, because it always depends on how long you use this device. In contrast to a normal radiator, with this convector I have a warm room after just a few seconds. Also ideal in the bathroom if you don't want to leave the heating on all day long, since the heating costs are enormous. Programming the convector so that it goes into comfort mode at a certain time in the morning and it's nice and warm in the bathroom. So I can heat when I need it and it's definitely a lot cheaper. And then of course the design. Visually simply the hit and an eye-catcher. I've seen a number of convectors, but they looked anything but chic. This one really does look like a TV at first glance. It looks really elegant and high-quality and fits into every room. The design is really successful and the workmanship is absolutely top. It makes a good impression both as a free-standing device or when mounted on a wall. We are absolutely thrilled and give it five stars.