Mein 24 Jahre alter Digital AV Receiver Kenwood KRF-7030 - 5.1 mit 5x100 Watt Sinusleistung musste in Rente gehen. Seine Fernbedienungsmöglichkeit war bereits vor 8 Jahren auf Altersteilzeit gegangen. Man musste für jede Änderung an Lautstärke, Eingang etc.pp. aus dem Sessel ... Es musste Ersatz her und es sollte vom Boxenumfang (5.1 mit insgesamt 11 Boxen) -abgerüstet werden. Ein guter 2.1 Stereo-Betrieb soll für Filme/Serien nun auch gut ausreichen. Anforderung war: optischer Eingang, koaxialer Eingang und mindestens 2x Stereo-Chinch und einen Ausgang für den (aktiven) Subwoofer. Gar nicht so einfach so etwas für den schmalen Taler zu Finden. Der auna AMP-2 DG konnte das anbieten, so weit so gut. Für 62,99€ nicht übel. Dazu habe ich noch 4 vernünftige Banenstecker geordert um die etwas dickeren Boxenkabel auch vernünftig anschließen zu können. Die Löcher im auna-Amp für die LS-Kabel sind dünn, sehr dünn. Also Bananenstecker dazu kaufen ist besser. Den auna-AMP also verkabelt und an meine 24 Jahre alten 50 Watt Zwei-Wege Boxen und darauf jeweils noch eine Jensen-Magnat Satellitenbox (für die präzisen Höhen) gestellt. Jetzt der erste Funktionstest: Lautes Plop! Subwoofer meldet sich mit Einschalt-Wumms zum Betrieb und brummt auch gleich vor sich hin. Brummt? Also fehlt der Potentialausgleich, ein kleines Kabel unter eine Gehäuseschraube (hinten) vom auna-AMP und andere Seite an die Metallrückplatte des aktiven Sub. Und Ruhe ist! Wie vermeide ich aber den Einschalt-Rumms vom Subwoofer? Ganz einfach, ich nutze den Einschalter vom auna-AMP überhaupt nicht mehr und verwende stattdessen die geniale Stand-By Funktion, die nur lächerlich wenige Milliwatt Strom zieht. (Diese Methode ist natürlich nichts für Leute mit psychotischer Strom-Phobie, die all ihre Geräte systematisch mit abschaltbaren Steckerleisten zugrunde richten -und dann noch glauben sie täten sich etwas Gutes damit) Wie ist der Klang? - reichen die 2x50 Watt RMS (die ja in echter Sinus Leistung gerade mal 12,5 bis maximal 15 Watt sind) auch aus? Klares ja, wenn die Boxen nicht gerade vom Trödelmarkt oder vom alten Walkman stammen. Ich war überrascht wie laut, kräftig und sauber hier verstärkt wird. Ich hatte weit weniger erwartet. Also Leistung für einen 20 qm Raum ist mit Reserven vorhanden. Der Klang ist natürlich zum Großteil von den Boxen abhängig, meine kenne ich ja vom alten Kennwood 5.1 AV Receiver. Nun am auna-AMP klingen diese keinen Deut schlechter. Glasklare Höhen, präzise Mitten und (Dank aktivem Sub) natürlich auch genug Bass. Der Klang ist in Höhen und Bass über die mitgelieferte (fipsige) Fernbedienung individuell über weite Bereiche regelbar (sehr gut). Es gibt auch einen eingebauten Equalizer mit 5 Presets, der bei Verwendung aber jedesmal die selbst eingestellten Höhen und Bässe wieder auf Linear (also Mittelstellung) setzt. (also nicht wundern) Alle meine Zuspielungen klingen für mein Empfinden sehr gut, ich hatte da Anfangs mit weniger gerechnet. Nun ist aber nicht alles Gold, was hier schimmert. Nachteile sind die Vergesslichkeit der letzten Eingangsquelle nach den Einschalten, egal ob Netzschalter oder Rückkehr aus dem Stand-By . Hier muss man dann jedes Mal die Quelle neu anwählen, kann über FB oder über das Touch-Display am Gerät geschehen. (auf dem Display ist eine Adhäsionsfolie- die sollte man abziehen) Kann man noch verschmerzen, anders wäre ja schon zu schön. Die Fernbedienung (1Knopfzelle CR2025) könnte natürlich größer, handlicher und zielsicherer sein, weit daneben halten ist da nicht angesagt. Wenn man das P/L Verhältnis betrachtet bekommt man durchaus nichts Verkehrtes. Bis jetzt bin ich doch halbwegs positiv überrascht.
My 24-year-old digital AV receiver Kenwood KRF-7030 - 5.1 with 5x100 watts sinus power had to retire. His remote control option had already gone into semi-retirement 8 years ago. You had to change the volume, input etc.pp. out of the armchair... A replacement was needed and the scope of the boxes (5.1 with a total of 11 boxes) should be reduced. A good 2.1 stereo operation should now also be sufficient for films/series. The requirement was: optical input, coaxial input and at least 2x stereo cinch and an output for the (active) subwoofer. Not so easy to find something for the narrow dollar. The auna AMP-2 DG could offer that, so far so good. Not bad for €62.99. In addition, I ordered 4 more reasonable banana plugs to be able to connect the somewhat thicker speaker cables properly. The holes in the auna amp for the LS cables are thin, very thin. So buying banana plugs is better. So I wired the auna-AMP and placed it on my 24-year-old 50-watt two-way speakers and on each of them a Jensen-Magnat satellite box (for the precise highs). Now the first function test: Loud pop! The subwoofer announces its operation with a bang when it is switched on and also hums to itself. buzzing? So the potential equalization is missing, a small cable under a housing screw (back) from the auna-AMP and the other side to the metal back plate of the active sub. And rest is! But how do I avoid the switch-on hum from the subwoofer? Quite simply, I no longer use the auna-AMP on switch at all and instead use the ingenious stand-by function, which only draws a ridiculous few milliwatts of electricity. (Of course, this method is not for people with psychotic electricity phobia, who systematically ruin all their devices with switchable power strips - and then think they are doing something good with it) How is the sound? - are the 2x50 watts RMS (which are just 12.5 to a maximum of 15 watts in real sinus power) sufficient? Of course yes, if the boxes don't just come from the flea market or from the old Walkman. I was surprised how loud, powerful and clean the amplification is here. I expected far less. So power for a 20 square meter room is available with reserves. The sound is of course largely dependent on the speakers, I know mine from the old Kennwood 5.1 AV receiver. Now on the auna-AMP they don't sound any worse. Crystal-clear highs, precise mids and (thanks to the active sub) of course enough bass. The sound can be adjusted individually over a wide range (very good) in terms of treble and bass using the supplied (fippy) remote control. There is also a built-in equalizer with 5 presets, which, however, sets the self-adjusted treble and bass back to linear (i.e. the middle position) each time it is used. (so don't be surprised) All my feeds sound very good in my opinion, I had expected less at the beginning. But not everything that shimmers here is gold. Disadvantages are the forgetting of the last input source after switching on, regardless of whether it is on the power switch or returning from stand-by. Here you have to select the source again each time, this can be done via FB or via the touch display on the device. (There is an adhesive film on the display - you should remove it) You can get over it, otherwise it would be too nice. The remote control (1 button cell CR2025) could of course be larger, handier and more accurate, aiming far away is not the order of the day. If you look at the P/L ratio you don't get anything wrong at all. So far I'm halfway positively surprised.