Figo 132 cm 55W Ceiling Fan with Light Black

Questa azienda non delude mai, silenziosissimo ed efficace. Le istruzioni non sono tanto dettagliate ma il montaggio è semplice ed intuitivo. Presto ne prenderemo un secondo.

This company never disappoints, very quiet and effective. The instructions are not very detailed but the assembly is simple and intuitive. We will soon get a second one.

Die Medien konnten nicht geladen werden. Acquisto riuscitissimo,silenzioso esteticamente bello e funzionale È esattamente quel che volevo.

The media can not be reached. Very successful purchase, silent, aesthetically beautiful and functional. It is exactly what I wanted.

We vinden hem echt top. Hij hangt bij ons in de huiskamer. snelle levering. heel stil. geeft goede verkoeling. we hebben er gelijk nog 1 besteld voor de slaapkamer

We really like it. It hangs in our living room. Fast delivery. Very quiet. Provides good cooling. We immediately ordered another one for the bedroom

Für den Preis ist der Ventilator wirklich ok. Würden meine Nachteile alle beseitigt werden, so wäre er sicher viel teurer. Ich habe sie trotzdem mal gelistet, so dass es für andere Käufer vielleicht eine Entscheidungshilfe ist. + nahezu lautloser Betrieb (Stufe 1 quasi unhörbar / Stufe 2 sehr leise / aber - Stufe 3 deutlich hörbares Rauschen durch Luftstrom) + Modernes Design (+) Keinerlei Unwucht oder Wackeln der Blätter (+) Integrierte Lampe (+) Sommer und Winter Betrieb (Rückwärts- oder Vorwärtslauf) (+) Fernbedienung für Licht an/aus und Ventilator in 3 Stufen (+) großer Durchmesser, macht ordentlich Wind (-) Integrierte Lampe hat keine Leuchtmittel inklusive (2 x E14 Sockel) - am besten gleich 2 LED Kerzen mit E14 Fassung mitbestellen (-) Montage etwas fummelig. Es muss einiges an Kabeln, Steckern und Steuernetzteil in die Obere Abdeckung der Deckenaufhängung. Zudem ist das Fixieren der Abdeckung mit 4 kleinen Schrauben nicht nur optisch nicht der Hit, sondern auch ein nerviges Gefummel, da man ganz nah an der Decke schrauben muss) (-) Wenn Fernbedienung mal defekt oder verloren --> keine Nutzung mehr möglich oder neukauf der FB nötig, wenn’s diese dann überhaupt noch gibt. (-) keine Absturzsicherung - wenn die Dübel nicht halten, Kopf ab bei dem der drunter steht --> bitte ggf. gute Fischerdübel oder Spreizdübel verwenden Alles in allem aber ein günstiges Modell mit Fernbedienung und Licht. Verglichen mit dem noName China Schrott immernoch ganz brauchbar (auch wenn der vielleicht ebenso in China produziert wird - aber wenigstens ist mit Klarstein ein namhafter Hersteller dahinter.)

For the price, the fan is really ok. If all of my disadvantages were eliminated, it would definitely be a lot more expensive. I've listed them anyway so that it might help other buyers make a decision. + Almost silent operation (level 1 practically inaudible / level 2 very quiet / but - level 3 clearly audible noise from the airflow) + Modern design (+) No imbalance or wobbling of the blades (+) Integrated lamp (+) Summer and winter operation (reverse or forward) (+) Remote control for light on/off and fan with 3 levels (+) Large diameter, creates a lot of wind (-) Integrated lamp does not have bulbs included (2 x E14 sockets) - best to order 2 LED candles with E14 sockets at the same time (-) Installation is a bit fiddly. A lot of cables, plugs and the control power supply have to be inserted into the upper cover of the ceiling suspension. Additionally, securing the cover with four small screws is not only visually disappointing, but also a pain in the ass, as you have to screw very close to the ceiling. (-) If the remote control breaks or is lost, it can no longer be used, or you have to buy a new remote control, if they even still exist. (-) No fall protection - if the dowels don't hold, cut off the head of the person underneath it --> please use good Fischer dowels or expansion dowels if necessary. All in all, a cheap model with a remote control and light. Compared to the no-name Chinese junk, it's still quite usable (even if it's probably also made in China - but at least Klarstein, a well-known manufacturer, is behind it.)

Wir haben den Ventilator eigentlich für unser Schlafzimmer bestellt. Dieses ist im Obergeschoss (hier ist es also schnell sehr warm) - das Bett steht vor der Dachschräge. Da wir einen Stromanschluß direkt über dem Bett haben (hier aktuell eine Lampe), wollten wir den Vetilator dort platzieren. Nun baut er komplett mit allen Teilen ca 50cm auf. D.h., dass er so weit von der Decke herabkommt. Addiert man dann die Höhe des Bettes hinzu und zieht das von der Zimmerhöhe von knapp 2,50m ab, bleibt dazwischen nicht mehr so viel. War also leider hier nicht wirklich so ideal. Nun gut - wir haben eine Art Landhaus und im Erdgeschoss eine Deckenhöhe von gut 3 Meter. Wir haben den Ventilator also im Wohnzimmer über das Sofa platziert. Das ist von der Höhe bestens. Na dann - ran an das Anbringen. Hier wird es dann etwas fummelig. Zunächst zur Grundplatte: wird mit nur 2 Schrauben gehalten. Die beiliegenden Schrauben habe ich durch entsprechend dicke Spenglerschrauben ausgetauscht - da war ich jetzt nicht so vom Original überzeugt von. Unsere Decke besteht aus längsverlaufenden Dielenbohlen. Gestützt werden diese von querverlaufenden Traversenbalken im Abstand von je 40cm. Die über 8 Kilo Gewicht des Ventilators im Kompletten werden also hier ganz gut abgefangen. In eine Betondecke heisst es also dübeln. In eine nur Vertäfelung mit Nut und Feder würde ich meich ehrlich gesagt nicht trauen - es zieht halt schon einiges an Gewicjt nach unten. Wie gesagt - der Zusammenbau dann ist etwas fummelig - 3 Teile (Grundplatte, Motorgehäuse mit Gestänge und die Grundplatte abdeckendem Dom; Leuchtstoffmittelgrundplatte), die ineinandergesteckt und dann miteinander verschraubt werden müssen. Die Kabel haben zum Teil sehr kleine Hohlräume, in die sie gefummelt werden müssen - das fordert manchmal Geduld, bis es so weit ist, dass alles seinen Platz findet. Ich habe in einer Vorrezension gelesen, dass der Käufer die Rotorblätter an das Maschinengehäuse montiert hatte, bevor er dieses an der Decke montiert hat und dieses Vorgehen besser fand, als die Rotorblätter über Kopf an das hängende Gehäuse zu schrauben. Sicher - mag so sein aber: Dann muss man das Maschinengehäuse mit der Aufhängestange und den Rotorblättern zusammen in die Aufhängung bugsieren und dann das Netzteil in die Aufhängung an ihren Platz an der Grundplatte bugsieren - an den Rotorblättern vorbei. Die muss man ja auch noch kippen, um das Gestänge n die Aufhängung einzuhaken. Ich stelle mir vor, dass das dann auch nicht so einfach sein wird. Die Grundplatte zu montieren, das Motorgehäuse mit Gestänge einzuhängen, das Netzteil montieren und die Steckverbindungen herzustellen, das Montieren des IR-Empfängers und das Montieren des die Grundplatte usw. verdeckenden Domes war eine 1-Mann-Aufgabe. Die Rotorblätter haben wir dann zu Zweit montiert: Zentriernut finden - zweite Person hält die Rotorblätter dann in der Position, Aufbauer Nr 1 zieht die Schrauben an - das funktioniert gut. Die Laufruhe in der schwächsten Position ist toll. Der Effekt ist hier schon sehr gut zu spüren - da bräuchte es eigentlich nicht mehr. Das ist so ruhig - da könnte man sicher super schlafen. Eine Zeitschaltung ist leider nicht implementiert - wäre eben für Schlafräume sicher nicht verkehrt. Wir ziehen nur eben einen Stern ab, weil einfach die Maße, die man von der Decke herabrechnen muss und die, die man vom Boden wegen des Bettes hinzurechnen muss, eine Montage über dem Bett, wenn man nicht gerade eine Deckenhöhe von 3 Meter hat, eigentlich nicht gut verwirklichen lassen.

We actually ordered the fan for our bedroom. It's upstairs (so it gets very warm here quickly) – the bed is in front of the sloping roof. Since we have an electrical connection directly above the bed (currently a lamp here), we wanted to place the fan there. Now, with all its components, it's about 50cm high. This means that it comes down that far from the ceiling. If you then add the height of the bed and subtract that from the room height of just under 2.50m, there's not much left in between. So, unfortunately, it wasn't ideal here. Well, we have a kind of country house and a ceiling height of a good 3 meters on the ground floor. So we placed the fan above the sofa in the living room. It's the perfect height. Now then – let's get to the installation. This is where it gets a bit fiddly. First, the base plate: it's held in place with just two screws. I replaced the included screws with correspondingly thick plumbing screws – I wasn't so convinced by the original. Our ceiling consists of lengthwise floorboards. These are supported by transverse crossbeams spaced 40cm apart. The over 8 kg weight of the complete fan is therefore well supported here. So, you'd have to screw it into a concrete ceiling using dowels. To be honest, I wouldn't dare put it into just tongue-and-groove paneling - it would pull quite a bit of weight downwards. As I said, the assembly is a bit fiddly - three parts (base plate, motor housing with rods and the dome covering the base plate; fluorescent lamp base plate) that have to be slotted into one another and then screwed together. Some of the cables have very small cavities that they have to be fiddled into - this sometimes requires patience until everything finds its place. I read in a previous review that the buyer had mounted the rotor blades to the machine housing before mounting it on the ceiling and found this process better than screwing the rotor blades overhead to the suspended housing. Sure - that may be true, but then you have to maneuver the motor housing, including the suspension rod and rotor blades, into the suspension, and then maneuver the power supply into the suspension, into its place on the base plate - past the rotor blades. You also have to tilt the rotor blades to hook the rods onto the suspension. I imagine that won't be so easy. Mounting the base plate, hanging the motor housing with the rods, installing the power supply and making the plug connections, mounting the IR receiver, and installing the dome that covers the base plate, etc., was a one-man job. Two of us then assembled the rotor blades: finding the centering groove - the second person then holds the rotor blades in position, while the first installer tightens the screws - it works well. The smooth running in the weakest position is fantastic. The effect is already very noticeable here - it really didn't need anything more. It's so quiet - you could definitely sleep well there. Unfortunately, there's no timer function implemented - it certainly wouldn't be a bad idea for bedrooms. We're just deducting one star because the dimensions you have to calculate from the ceiling down and the ones you have to add from the floor for the bed make it difficult to install above the bed unless you have a ceiling height of 3 meters.

Wir haben den Ventilator jetzt seit knapp zwei Monaten im Einsatz. Die Montage war nach knapp einer Stunde erledigt. Man muss eigentlich nicht sehr viel dabei können. Die Montage zu zweit ist empfehlenswert. Und die vorhandenen Dübel kann man eigentlich gleich wegschmeißen. Das Teil ist doch recht schwer. Ich habe ihn an einer Gipskartondecke montiert. Da sollte man auf jeden Fall Spezial schwerlastdübel verwenden. Für alle die sich vorbereiten wollen man braucht vier Stück. Die Fernbedienung sieht echt gut aus und auch sonst kann man nichts schlechtes sagen. Der Streuradius vom Windzug ist aber nicht so sehr groß. Hängt logischerweise auch von der Montahehöhe ab. Bei 2,50 m Ventilatorhöhe ist noch 2 m rechts und links neben dem Gerät was zu spüren. Viel größer ist der Streuradius aber nicht. Die dritte Stufe ist deutlich zu hören.

We've been using the fan for almost two months now. It took about an hour to install it. You don't really need a lot of skill to do it. We recommend using two people to install it. And you can basically just throw away the existing wall anchors. The thing is quite heavy. I installed it on a plasterboard ceiling. You should definitely use special heavy-duty wall anchors. For those who want to be prepared, you'll need four. The remote control looks really good and there's nothing else bad to say. The wind throws around a bit though. It obviously also depends on the installation height. With a fan height of 2.50 m you can still feel it 2 m to the right and left of the device. But the throw isn't much bigger. The third speed is clearly audible.

Ein wenig ausführlicher: Vorbereitung: In der Anleitung wird auf 100kg Traglast in der Decke hingewiesen. Dies scheint mir recht überdimensioniert, da es kaum normale Dübel gibt, die das garantieren. Erst recht nicht in einer Leichtbaudecke. Egal, vernünftige Hohlraumdübel gehen auch. Das Gerät ist an sich ca 8 kg schwer. Also kein Problem. Anbau dauerte ca. eine Stunde (alleine). Aufpassen beim Anbau dass keine Kabel einklemmen, ansonsten ein wenig Fummelei, aber doch recht einfach. Betrieb: Erstes fiel auf, dass das Teil sehr leise ist. Aus den Staaten kenne ich einige Geräte, aber das ist richtig leise. Windzug ist gut spürbar, sogar schon auf der kleinste Stufe. In die zwei E14 Fassungen kamen gleich noch über Alexa steuerbare und dimmbare Leuchtmittel. Kurz eingerichtet und einfach genial. Das Design von dem Propeller ist auch angenehm. Sieht halt nicht altmodisch und kitschig aus wie in Amerika, sondern durch die drei Rotoren sehr modern. Werde demnächst noch mehr bestellen und verbauen.

A little more detail: Preparation: The instructions state a 100 kg load capacity for the ceiling. This seems rather excessive to me, as there are hardly any standard anchors that guarantee this. Especially not in a lightweight ceiling. Anyway, decent hollow wall anchors will work too. The device itself weighs around 8 kg, so it's no problem. Installation took about an hour (by myself). Be careful not to pinch any cables; otherwise, it's a bit fiddly, but actually quite simple. Operation: The first thing I noticed is that the device is very quiet. I know a few devices from the States, but this one is really quiet. You can definitely feel the breeze, even on the lowest setting. I also installed Alexa-controlled and dimmable bulbs in the two E14 sockets. Quick setup and simply brilliant. The design of the propeller is also pleasing. It doesn't look old-fashioned and kitschy like in America, but very modern thanks to the three rotors. I'll be ordering and installing more soon.

Tout a été dit et photographié dans les quatre évaluations précédentes et reste d’actualité à l’ usage ! Le ventilateur est efficace dès la vitesse lente, il brasse bien l’air grâce à sa forme aérodynamique design, et ceci dans un parfait silence: parfait pour une chambre à coucher, surtout qu’ il est piloté par télécommande. Pour ceux qui veulent de l’ extraction: les autres vitesses sont doublement efficaces et le bruit qu’on entend n’ est que le bruit de l’air brassé: le moteur est parfaitement silencieux. La lumière émise par le plafonnier est bien diffusée et également gérable par la télécommande . N’hésitez pas, c’ est un matériel fiable, esthétique et facile à monter.

Everything has been said and photographed in the four previous reviews and remains relevant in use! The fan is effective even at low speed, it circulates the air well thanks to its aerodynamic design, and this in perfect silence: perfect for a bedroom, especially since it is controlled by remote control. For those who want extraction: the other speeds are doubly effective and the noise you hear is only the sound of the air being circulated: the motor is perfectly silent. The light emitted by the ceiling light is well diffused and also manageable by remote control. Don't hesitate, it is reliable, attractive and easy to assemble equipment.

Die Medien konnten nicht geladen werden. Con l’arrivo dell’estate e quindi del caldo, non possiamo negare l’esigenza di un ventilatore, magari da soffitto, per rinfrescare le nostre notti insonni. A tutto c’è una soluzione e la tecnologia, come abbiamo imparato nel corso degli anni, ci aiuta praticamente in tutto. Di ventilatori ce ne sono tanti e di tutti i tipi, ma noi di Guide & Recensioni abbiamo avuto l’onore di testare il ventilatore dell’azienda tedesca Klarstein. disponibile all’acquisto sia su amazon che sul sito electronic-star, nonchè sul sito del produttore. Il prodotto che andremo a recensire è il modello ’’Figo’’ che non si limita a rinfrescarci nelle giornate più calde dell’estate che sta arrivando, ma svolge anche funzione di lampadario grazie appunto alla plafoniera costituita da 2 lampade da 43W non incluse nella confezione. Muniamoci quindi di lampadine e scopriamo a questo punto cosa troviamo all’interno della confezione di acquisto. - Ventilatore da montare, completo di kit di montaggio, - Telecomando (batterie non incluse) - Manuale d’istruzione (anche in lingua italiana) Confezione completa e soprattutto arriva a casa ben protetta grazie agli inserti in polisterolo per proteggere il contenuto da eventuali urti causati dal trasporto. Tirato fuori dalla confezione, risulta essere sì pesante, come mi aspettavo, ma in un certo senso leggero se paragonato ad altri prodotti simili. Caratterizzato dal design moderno e raffinato, si integra perfettamente con gli arredamenti più moderni e grazie alla forma curva delle tre pale in plastica, l’aspetto complessivo risulta essere piacevole alla vista. Come abbiamo appena detto, le tre pale sono costruite completamente in materiale plastico di colore bianco, anche se sul sito del produttore, oltre che su amazon, è disponibile anche nella colorazione titanio. Gusti personali a parte, sia che lo scegliate bianco o titanio le foto non rendono la giusta bellezza che trasmette dal vivo. Stiamo parlando quindi di un accessorio che renderà il vostro arredamento ancora più smart, oltre a rendere più piacevoli le vostre giornate estive e grazie al pratico e completo telecomando che troviamo nella confezione, alimentato da 2 batterie AAA non incluse, potremo azionare il ventilatore o accendere e spegnere la luce semplicemente premendo gli appositi tasti. Potremo inoltre regolare la velocità di rotazione delle pale o addirittura la direzione. Le velocità sono 3: Bassa, media e alta. Le pale XL raggiungono una grandezza complessiva di 52’’ così da produrre piacevoli correnti d’aria, creando, grazie al ritmico e lieve rumore, un’atmosfera di pieno relax per portare un fresco celestiale direttamente a casa vostra. In questo modo le giornate estive saranno caratterizzate da una freschezza paradisiaca. Dati tecnici: ’ interruttori a catenella per lampada e ventilatore separati e direttamente sul dispositivo ’ potenza assorbita ventilatore: 55 W ’ senso orario: distribuisce l’aria calda verso il basso in caso di clima freddo ’ senso antiorario: produce fresche correnti d’aria in caso di caldo ’ lampada con vetro smerigliato ’ montatura lampadina: E27 ’ installazione fisse alla linea di corrente ’ alimentazione: 220-240 V~ / 50-60 Hz ’ alimentazione telecomando: 2 x batterie AAA (non incluse) Dimensioni: ’ dimensioni: ca. 132 x 40 cm (ØxA) ’ diametro lampadario: 20 cm ’ peso: ca. 8,5 kg Dopo averlo testato per bene, il processo di montaggio non richiede particolari doti, in quanto basterà seguire il manuale utente, e devo dire che è complessivamente davvero un ottimo prodotto. Le caratteristiche interessanti sono molteplici, ad esempio possiamo salvare gli spazi ed usarlo quindi anche come lampadario, sia contemporaneamente alla funzione ventilatore e sia indipendentemente da questa, controllando e impostando il tutto dal telecomando. Un accessorio quindi completo, che sarebbe stato ancora più smart se lo si poteva controllare da remoto direttamente dallo smartphone, magari tramite app dedicata, così da poter impostare anche accensione e spegnimento programmato. Tuttavia al costo di soli 140 euro circa è una soluzione più che valida ed è per questo che vi consigliamo l’acquisto direttamente qui su amazon o sul sito ufficiale del rivenditore electronic-star che ringraziamo per averci concesso l’opportunità di provare questo prodotto. Vi invitiamo inoltre a visitare il sito menzionato sopra in quanto sono presenti diverse soluzioni tecnologiche che speriamo di recensire per voi il prima possibile.

The media cannot be denied. With the arrival of summer and therefore of the heat, we cannot deny the need for a fan, perhaps a ceiling fan, to cool our sleepless nights. There is a solution for everything and technology, as we have learned over the years, helps us with practically everything. There are many fans of all types, but we at Guide & Reviews have had the honor of testing the fan from the German company Klarstein, available for purchase both on Amazon and on the electronic-star website, as well as on the manufacturer's website. The product we are going to review is the ''Figo'' model which not only cools us down on the hottest days of the coming summer, but also acts as a chandelier thanks to the ceiling light consisting of 2 43W lamps not included in the package. So let's get some light bulbs and find out what we find inside the purchase package. - Fan to be assembled, complete with assembly kit, - Remote control (batteries not included) - Instruction manual (also in Italian) Complete package and above all it arrives at home well protected thanks to the polystyrene inserts to protect the contents from any shocks caused by transport. Taken out of the package, it turns out to be heavy, as I expected, but in a certain sense light when compared to other similar products. Characterized by a modern and refined design, it integrates perfectly with the most modern furnishings and thanks to the curved shape of the three plastic blades, the overall appearance is pleasant to the eye. As we have just said, the three blades are made entirely of white plastic material, even if on the manufacturer's website, as well as on Amazon, it is also available in titanium. Personal tastes aside, whether you choose it white or titanium, the photos do not do justice to the beauty it transmits in person. We are therefore talking about an accessory that will make your furniture even smarter, as well as making your summer days more pleasant and thanks to the practical and complete remote control that we find in the package, powered by 2 AAA batteries not included, we can operate the fan or turn the light on and off simply by pressing the appropriate buttons. We can also adjust the rotation speed of the blades or even the direction. There are 3 speeds: Low, medium and high. The XL blades reach a total size of 52'' so as to produce pleasant air currents, creating, thanks to the rhythmic and light noise, an atmosphere of full relaxation to bring a celestial freshness directly to your home. In this way the summer days will be characterized by a heavenly freshness. Technical data: ' Chain switches for lamp and fan separate and directly on the device ' Fan power consumption: 55 W ' Clockwise direction: distributes warm air downwards in cold weather ' Counterclockwise direction: produces fresh air currents in hot weather ' Lamp with frosted glass ' Bulb fitting: E27 ' Fixed installation on the mains ' Power supply: 220-240 V~ / 50-60 Hz ' Remote control power supply: 2 x AAA batteries (not included) Dimensions: ' Dimensions: approx. 132 x 40 cm (ØxH) ' Lamp diameter: 20 cm ' Weight: approx. 8.5 kg After having tested it thoroughly, the assembly process does not require any special skills, as you just need to follow the user manual, and I must say that overall it is a really excellent product. The interesting features are many, for example we can save space and therefore also use it as a chandelier, both at the same time as the fan function and independently of it, controlling and setting everything from the remote control. A complete accessory, therefore, which would have been even smarter if it could be controlled remotely directly from the smartphone, perhaps via a dedicated app, so as to also be able to set programmed switching on and off. However, at a cost of only about 140 euros it is a more than valid solution and this is why we recommend purchasing it directly here on Amazon or on the official website of the electronic-star retailer that we thank for giving us the opportunity to try this product. We also invite you to visit the site mentioned above as there are several technological solutions that we hope to review for you as soon as possible.