Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium Nickle Metallic

Figo Ceiling Fan

Nickle Metallic Ceiling fan
£ 119.99 (incl. VAT)
Main colour:

Figo Ceiling Fan

£ 119.99 (incl. VAT)
Ready for shipping Delivery time: 3 - 5 workdays
30 day cooling off period Free delivery, no minimum order

Top features

2-in-1: ceiling fan and ceiling lamp in one

Powerful: large, smooth-running fan with a diameter of 52" (132 cm)

Smooth-running wind turbine: air circulation of up to 10,039 m³ / h at max. 51 dB working noise

Product description

Three wings for a hallelujah: the Klarstein Figo ceiling fan brings heavenly refreshment to the comfort of your own home. As a result, you can now experience paradisiacal cooling on hot summer days.

With the Klarstein Figo ceiling fan, air circulation from top to bottom works simply and comfortably. This not only brings fresh wind into the bedroom. With three extra-large blades, the 52” fan achieves an air circulation of up to 10,039 m³ / h in three speeds. At the same time, it fans fresh air like an angel and creates a relaxing, calming atmosphere with its quiet, rhythmic noise of up to 51 dB. Both directions of rotation enable use on warm and cold days: in clockwise rotation it pushes warm air down from the ceiling and thus helps with heating in winter, in counterclockwise rotation it supplies the entire room with a refreshing air flow and provides relief on hot days. Particularly practical: the built-in ceiling lamp illuminates dark hours and enables space-saving installation directly on the existing power supply above ground. All functions of the Figo can be controlled directly from the ground comfortably by remote control.

Heavenly air freshener with a halo. The Klarstein Figo ceiling fan brings interiors close to paradise.

Please note that the lightbulbs and batteries required are not included in the scope of delivery.

Show more

Features

Download user manual
  • Separate on / off switch for fan and light directly on the device by chain hoist
  • Air flow: max. 10,039 m³ / h
  • Max. operating noise: 51 dB
  • Power consumption fan: 55 W.
  • Clockwise rotation: distributes warm ceiling air in the room in cold weather
  • Left rotation: generates cooling air flow in warm weather
  • Lamp with frosted glass shade
  • Lamp holder: 2 x E14
  • Fixed installation directly on the power grid
  • Power supply: 220-240 V ~ | 50-60 Hz
  • Power supply remote control: 2 x AAA battery (not included)
Figo Ceiling Fan 52" 55W Ceiling Lamp 2x42W Remote Control Titanium

Dimensions and Technical Details

  • Dimensions: about. 132 x 40 cm (ØxH)
  • Diameter lamp: 20 cm
  • Weight: about 8.5 kg

What will be delivered

  • 1 x ceiling fan (mounting set)
  • 1 x remote control
  • Multilingual user manual

Delivery & shipment

Ready for shipping Delivery time: 3 - 5 workdays

Customer reviews

No review available for this item.

Customer reviews from other countries

Tested review

der Artikel entspricht genau unseren Erwartungen

the item is exactly what we expected

Tested review

Sehr guter Ventilator zu einem günstigen Preis.

Very good fan at a great price.

Tested review

Dieser Deckenventilator ist wirklich schön leise, auf Stufe 2 könnte man wahrscheinlich immer noch gut schlafen, aber uns reicht die Stufe 1 im Schlafzimmer. Haben uns einen zweiten für das Wohnzimmer geholt.....wunderbar

This ceiling fan is really nice and quiet, you could probably still get a good night's sleep on setting 2, but setting 1 in the bedroom is enough for us. We got a second one for the living room.....wonderful

Tested review

Wärmeleistung mäßig ist kein Kühlgerät verwirbelt nur die Luft

Heat output is moderate, no cooling device just swirls the air

Tested review

Mein Sohn kam zu Besuch, sah das schöne Teil und meinte, "den möchte ich auch, wo hast Du den gekauft"? Also bestellte ich einen zweiten und schenkte ihm diesen Ventilator. Ich kann mich einer Kundenrezension nicht anschließen der meint, dass der Rotor aus Vollplastik sei und dadurch minderwertig für ihn ist, wir finden alle das der Ventilator hochwertig aussieht. Dieser wird eben in einer Form gegossen und nicht aus einer Baumrinde geschnitzt. Auch hat die Lagerung in der Mitte (gewackel wie einer meint), einen Sinn. Alles Gute an alle da draußen, Stefanie aus Graz

My son came to visit, saw the beautiful piece and said, "I want that too, where did you buy that"? So I ordered a second one and gifted him this fan. I can't agree with a customer review that says the rotor is all plastic and therefore inferior to them, we all think the fan looks high quality. This is cast in a mold and not carved from a tree bark. The storage in the middle (wobbly as one thinks) also makes sense. All the best to everyone out there, Stefanie from Graz

Tested review

Stufe 1 und 2 fast unhörbar - Stufe 3 gut Hörbar. Funktion OK - wäre gut wenn die Drehrichtung mit der Fernbedienung und nicht am aufgehängten Gerät umzuschalten wäre. Die Montage ist nicht ganz einfach.

Level 1 and 2 almost inaudible - level 3 well audible. Function OK - would be good if the direction of rotation could be switched with the remote control and not on the suspended device. The assembly is not very easy.

Tested review

Der Anbau war furchtbar nervig!! Kabel und Trafo passen mal gerade so unten die Abdeckung ... das war ein Geschiebe und Gequetsche, fast zum durchdrehen! Wer sich da erfolgreich durchwuselt, ohne alles wieder von der Decke zu reißen, hat jedoch einen schönen Ventilator, der seinen Dienst kaum wahrnehmbar verrichtet. Einziger Nachteil für mich: Es gibt leider nur drei Geschwindigkeitsstufen. Die stärkste ist kaum sinnvoll nutzbar. Die mittlere ist mir auch zu stark (zumindest, wenn man direkt darunter steht) und die leichteste sollte für die meisten Anwendungsfälle passen. Ich würde mir jedoch aus diesem Grund das nächste Mal ein anderes Modell mit mehr Stufen kaufen.

The cultivation was terribly annoying!! The cable and transformer just barely fit under the cover ... that was pushing and squeezing, almost maddening! Anyone who successfully scurries through it without ripping everything off the ceiling again has a nice fan that does its job almost imperceptibly. The only disadvantage for me: Unfortunately, there are only three speed levels. The strongest is hardly useful. The middle one is also too strong for me (at least when you're standing directly underneath it) and the lightest one should be fine for most use cases. However, for this reason I would buy another model with more steps next time.

Tested review

Der Ventilator ist top Der Zusammenbau shit , habe gehört das Profis es schaffen den leuchten Teil unter einer Std an zu bauen , ich habe das nicht geschafft. Frage mich welcher Einkaufs Idiot an 20 mm Schraube gesparrt hat . Nach Zusammenbau wollte ich als Heimwerker alles stolz meiner PartnerinPartnerin präsentieren aber shit keine Batterien für die Fernbedienung und keine Leuchtelemente für die Lampe Da stehst du nach zwei Std Arbeit als idiot da Schön , funktioniert, nicht kaufen LG

The fan is great The assembly sucks, I heard that professionals manage to build the lighted part in under an hour, I didn't manage it. I wonder which shopping idiot saved on a 20 mm screw. After assembly I wanted to proudly present everything to my partner as a do-it-yourselfer but shit no batteries for the remote control and no light elements for the lamp There you are after two hours of work as an idiot Nice, works, don't buy LG

Tested review

Gut verarbeiteter und moderner deckenventilator. Wir haben ihn direkt über das Bett gehängt um bei den warmen Sommertagen gut zu schlafen. Auf niedrigster Stufe ist er auch komplett nicht zu hören. Einziger Minuspunkt, da er bei mittlerer und höherer Stufe zwischendurch knackt und da sehe ich wohl einen produktionsfehler

Well made and modern ceiling fan. We hung it directly over the bed to sleep well on warm summer days. At the lowest level, you can't hear it at all. The only minus point, because it cracks at medium and higher levels in between and I see a production error there

Tested review

Für den Preis ist der Ventilator wirklich ok. Würden meine Nachteile alle beseitigt werden, so wäre er sicher viel teurer. Ich habe sie trotzdem mal gelistet, so dass es für andere Käufer vielleicht eine Entscheidungshilfe ist. + nahezu lautloser Betrieb (Stufe 1 quasi unhörbar / Stufe 2 sehr leise / aber - Stufe 3 deutlich hörbares Rauschen durch Luftstrom) + Modernes Design (+) Keinerlei Unwucht oder Wackeln der Blätter (+) Integrierte Lampe (+) Sommer und Winter Betrieb (Rückwärts- oder Vorwärtslauf) (+) Fernbedienung für Licht an/aus und Ventilator in 3 Stufen (+) großer Durchmesser, macht ordentlich Wind (-) Integrierte Lampe hat keine Leuchtmittel inklusive (2 x E14 Sockel) - am besten gleich 2 LED Kerzen mit E14 Fassung mitbestellen (-) Montage etwas fummelig. Es muss einiges an Kabeln, Steckern und Steuernetzteil in die Obere Abdeckung der Deckenaufhängung. Zudem ist das Fixieren der Abdeckung mit 4 kleinen Schrauben nicht nur optisch nicht der Hit, sondern auch ein nerviges Gefummel, da man ganz nah an der Decke schrauben muss) (-) Wenn Fernbedienung mal defekt oder verloren --> keine Nutzung mehr möglich oder neukauf der FB nötig, wenn's diese dann überhaupt noch gibt. (-) keine Absturzsicherung - wenn die Dübel nicht halten, Kopf ab bei dem der drunter steht --> bitte ggf. gute Fischerdübel oder Spreizdübel verwenden Alles in allem aber ein günstiges Modell mit Fernbedienung und Licht. Verglichen mit dem noName China Schrott immernoch ganz brauchbar (auch wenn der vielleicht ebenso in China produziert wird - aber wenigstens ist mit Klarstein ein namhafter Hersteller dahinter.)

For the price the fan is really ok. If all my disadvantages were eliminated, it would certainly be much more expensive. I listed them anyway, so that it might help other buyers to make a decision. + Almost silent operation (level 1 almost inaudible / level 2 very quiet / but - level 3 clearly audible noise due to air flow) + Modern design (+) No imbalance or wobbling of the leaves (+) Integrated lamp (+) Summer and winter operation ( backwards or forwards) (+) remote control for light on/off and fan in 3 stages (+) large diameter, makes a lot of wind (-) integrated lamp has no bulbs included (2 x E14 socket) - preferably 2 LED candles order with E14 socket (-) installation a bit fiddly. A lot of cables, plugs and control power supply have to be installed in the top cover of the ceiling mount. In addition, fixing the cover with 4 small screws is not only visually not the best, but also an annoying fumbling, since you have to screw very close to the ceiling) (-) If the remote control is defective or lost --> no longer possible to use or Repurchase the FB necessary, if it's still there at all. (-) no fall protection - if the dowels don't hold, head off where the one is underneath --> please use good fisherman dowels or expansion dowels, if necessary. All in all, a cheap model with remote control and light. Compared to the noName China scrap, it's still quite usable (even if it might also be produced in China - but at least Klarstein is a well-known manufacturer behind it.)

Tested review

Optisch find ich das Teil ansprechend. Die Montage war für mich als Handwerker einfach und schnell erledigt. Jetzt aber das "Aber": die leichte Unwucht in der Drehbewegung hab ich schon vor der Montage festgestellt. Im "Low" Modus spürt man kaum einen Luftzug deshalb auch schön leise. Im "Medium" Modus ist die Luftzirkulation gut und immer noch ein angenehmer leiser Betrieb. Im "High" Modus fängt das Teil an zu tanzen und zu wackeln bedingt durch die Unwucht und durch das etwas zu lang geratene Gestänge. Ich werd den Ventilator wohl nur im Medium Modus nutzen, da ich kein Lust habe das Teil zu demontieren, zu verpacken und wieder zurück zu schicken. Die Rotorblätter sind aus Vollplastik was auf mich auch minderwertig wirkt. Am meisten ärgert mich das gewackel und das ich mich auf die Bewertungen anderer verlassen habe. Von mir 2 Punkte Abzug, weil es auch besser geht in der Preisklasse! Ich habe noch in einem anderen Zimmer einen Deckenventilator von Westinghouse. Der ist qualtativ wesentlich besser verarbeitet und wackelt null.

I find the part visually appealing. The installation was easy and quick for me as a craftsman. But now the "but": I noticed the slight imbalance in the rotary movement even before assembly. In "Low" mode you hardly feel a draft, so it's also nice and quiet. In "Medium" mode, airflow is good and still a pleasantly quiet operation. In "High" mode, the part begins to dance and wobble due to the imbalance and the slightly too long linkage. I will probably only use the fan in medium mode because I don't feel like disassembling, packing and sending the part back. The rotor blades are made of solid plastic, which also seems inferior to me. What annoys me the most is the wobbling and the fact that I have relied on the reviews of others. 2 points deduction from me, because it is better in the price range! I have a Westinghouse ceiling fan in another room. The quality is much better processed and wobbles zero.

Tested review

12 Stunden an der Decke, 1. Gedanke warum hab ich das nicht viel früher gemacht. Montiert hab ich den Ventilator an der Decke und obwohl ich mich teilweise ganz schön dämlich angestellt habe ging es zügig, die meiste Zeit habe ich damit verbracht die runtergefallenen Schrauben zu suchen. Das Teil sieht wirklich geil aus die Fernbedienung funktioniert einwandfrei und jetzt kommt das beste, man kann ihn nicht hören nein man kann ihn garnicht hören phantastisch, sollte sich da etwas ändern melde ich mich sofort.

12 hours on the ceiling, 1st thought why didn't I do it much earlier. I mounted the fan on the ceiling and although I was pretty stupid at times, it went quickly, I spent most of the time looking for the screws that had fallen off. The part looks really cool, the remote control works perfectly and now comes the best, you can't hear it, no, you can't hear it at all, fantastic, if something changes, I'll get in touch immediately.

Tested review

Alles war gut verpackt aber die Flügel sind sehr scharfkantig also Vorsicht beim auspacken und montieren des weiteren sind die vielen Schrauben ,die zu sehen sind ,so nicht abgebildet und es ist echt ein Monsterventilator , super leise und die leuchtmittel kann man selbst wählen z.B.HUE E14 Philips dann kann man sich morgen wecken lassen vom Licht und einer frischen Brise geile Kombination

Everything was well packed, but the wings are very sharp-edged, so be careful when unpacking and assembling. Furthermore, the many screws that can be seen are not shown and it is really a monster fan, super quiet and you can choose the bulbs yourself, e.g. HUE E14 Philips then you can be woken up tomorrow by the light and a fresh breeze - great combination

Tested review

Der Klarstein Figo 2019 Edition macht das was er soll gut. Er ist absolut leise, auch noch auf Stufe 2, bei Stufe 3 hört man dann immer noch keinen Motor, aber natürlich Luftgeräusche. Nachdem ich mit dem Lorefar LANTAU Faro 33370 einen absoluten Reinfall erlitten habe ist dies mein 2ter Ventilator. Optisch ist er nicht ganz so schick wie der Lorefar, aber dafür wesentlich sicherer. Die Kstst. Rotorblätter sind gut am Motor befestigt, und der Montagevorgang ist gut beschrieben. Da ich ihn auch nachts im Schlafzimmer betreibe hat sich der "Wintermodus" bei mir bewährt. Da wird die Luft von unten gegen die Decke gedrückt und es entsteht eine gleichmäßige, angenehme Luftbewegung im Raum, ohne Zug! Ich hoffe das er auch weiter so funktioniert und nicht wie der Lorefar nach einer guten Woche den Geist aufgibt. Die langen mails und Wartezeit bis ich ihn dann zurücksenden konnte, braucht man nicht.

The Klarstein Figo 2019 Edition does what it is supposed to do well. It is absolutely quiet, even at level 2, at level 3 you still don't hear any engine, but of course you can hear air noise. After suffering an absolute flop with the Lorefar LANTAU Faro 33370, this is my second fan. Visually, it is not quite as chic as the Lorefar, but it is much safer. the art Rotor blades are well attached to the engine and the assembly process is well described. Since I also use it in the bedroom at night, the "winter mode" has proven itself for me. The air is pressed from below against the ceiling and there is an even, pleasant air movement in the room, without a draft! I hope that it will continue to work like this and not give up the ghost like the Lorefar after a good week. You don't need the long emails and waiting time until I could send it back.

Tested review

Wir haben den Ventilator jetzt seit knapp zwei Monaten im Einsatz. Die Montage war nach knapp einer Stunde erledigt. Man muss eigentlich nicht sehr viel dabei können. Die Montage zu zweit ist empfehlenswert. Und die vorhandenen Dübel kann man eigentlich gleich wegschmeißen. Das Teil ist doch recht schwer. Ich habe ihn an einer Gipskartondecke montiert. Da sollte man auf jeden Fall Spezial schwerlastdübel verwenden. Für alle die sich vorbereiten wollen man braucht vier Stück. Die Fernbedienung sieht echt gut aus und auch sonst kann man nichts schlechtes sagen. Der Streuradius vom Windzug ist aber nicht so sehr groß. Hängt logischerweise auch von der Montahehöhe ab. Bei 2,50 m Ventilatorhöhe ist noch 2 m rechts und links neben dem Gerät was zu spüren. Viel größer ist der Streuradius aber nicht. Die dritte Stufe ist deutlich zu hören.

We have been using the fan for almost two months now. Installation was completed in less than an hour. You don't really have to be very good at it. Assembly with two people is recommended. And the existing dowels can actually be thrown away right away. That part is pretty heavy. I mounted it on a plasterboard ceiling. You should definitely use special heavy-duty dowels. For those who want to prepare you need four pieces. The remote control looks really good and otherwise you can't say anything bad. However, the scattering radius of the wind current is not very large. Depends logically on the Montahehöhe. With a fan height of 2.50 m, you can still feel something 2 m to the right and left of the device. However, the scattering radius is not much larger. The third stage can be clearly heard.

Tested review

Wir haben den Ventilator eigentlich für unser Schlafzimmer bestellt. Dieses ist im Obergeschoss (hier ist es also schnell sehr warm) - das Bett steht vor der Dachschräge. Da wir einen Stromanschluß direkt über dem Bett haben (hier aktuell eine Lampe), wollten wir den Vetilator dort platzieren. Nun baut er komplett mit allen Teilen ca 50cm auf. D.h., dass er so weit von der Decke herabkommt. Addiert man dann die Höhe des Bettes hinzu und zieht das von der Zimmerhöhe von knapp 2,50m ab, bleibt dazwischen nicht mehr so viel. War also leider hier nicht wirklich so ideal. Nun gut - wir haben eine Art Landhaus und im Erdgeschoss eine Deckenhöhe von gut 3 Meter. Wir haben den Ventilator also im Wohnzimmer über das Sofa platziert. Das ist von der Höhe bestens. Na dann - ran an das Anbringen. Hier wird es dann etwas fummelig. Zunächst zur Grundplatte: wird mit nur 2 Schrauben gehalten. Die beiliegenden Schrauben habe ich durch entsprechend dicke Spenglerschrauben ausgetauscht - da war ich jetzt nicht so vom Original überzeugt von. Unsere Decke besteht aus längsverlaufenden Dielenbohlen. Gestützt werden diese von querverlaufenden Traversenbalken im Abstand von je 40cm. Die über 8 Kilo Gewicht des Ventilators im Kompletten werden also hier ganz gut abgefangen. In eine Betondecke heisst es also dübeln. In eine nur Vertäfelung mit Nut und Feder würde ich meich ehrlich gesagt nicht trauen - es zieht halt schon einiges an Gewicjt nach unten. Wie gesagt - der Zusammenbau dann ist etwas fummelig - 3 Teile (Grundplatte, Motorgehäuse mit Gestänge und die Grundplatte abdeckendem Dom; Leuchtstoffmittelgrundplatte), die ineinandergesteckt und dann miteinander verschraubt werden müssen. Die Kabel haben zum Teil sehr kleine Hohlräume, in die sie gefummelt werden müssen - das fordert manchmal Geduld, bis es so weit ist, dass alles seinen Platz findet. Ich habe in einer Vorrezension gelesen, dass der Käufer die Rotorblätter an das Maschinengehäuse montiert hatte, bevor er dieses an der Decke montiert hat und dieses Vorgehen besser fand, als die Rotorblätter über Kopf an das hängende Gehäuse zu schrauben. Sicher - mag so sein aber: Dann muss man das Maschinengehäuse mit der Aufhängestange und den Rotorblättern zusammen in die Aufhängung bugsieren und dann das Netzteil in die Aufhängung an ihren Platz an der Grundplatte bugsieren - an den Rotorblättern vorbei. Die muss man ja auch noch kippen, um das Gestänge n die Aufhängung einzuhaken. Ich stelle mir vor, dass das dann auch nicht so einfach sein wird. Die Grundplatte zu montieren, das Motorgehäuse mit Gestänge einzuhängen, das Netzteil montieren und die Steckverbindungen herzustellen, das Montieren des IR-Empfängers und das Montieren des die Grundplatte usw. verdeckenden Domes war eine 1-Mann-Aufgabe. Die Rotorblätter haben wir dann zu Zweit montiert: Zentriernut finden - zweite Person hält die Rotorblätter dann in der Position, Aufbauer Nr 1 zieht die Schrauben an - das funktioniert gut. Die Laufruhe in der schwächsten Position ist toll. Der Effekt ist hier schon sehr gut zu spüren - da bräuchte es eigentlich nicht mehr. Das ist so ruhig - da könnte man sicher super schlafen. Eine Zeitschaltung ist leider nicht implementiert - wäre eben für Schlafräume sicher nicht verkehrt. Wir ziehen nur eben einen Stern ab, weil einfach die Maße, die man von der Decke herabrechnen muss und die, die man vom Boden wegen des Bettes hinzurechnen muss, eine Montage über dem Bett, wenn man nicht gerade eine Deckenhöhe von 3 Meter hat, eigentlich nicht gut verwirklichen lassen.

We actually ordered the fan for our bedroom. This is on the upper floor (so it quickly gets very warm here) - the bed is in front of the sloping roof. Since we have a power connection directly above the bed (here currently a lamp), we wanted to place the ventilator there. Now he builds up completely with all parts about 50cm. That means that he comes down so far from the ceiling. If you then add the height of the bed and subtract that from the room height of almost 2.50m, there is not that much in between. So unfortunately it wasn't really that ideal here. Well - we have a kind of country house and the ground floor has a ceiling height of a good 3 meters. So we placed the fan in the living room above the sofa. That's great from the height. Well then - get to the attachment. This is where it gets a bit fiddly. First to the base plate: is held with only 2 screws. I replaced the enclosed screws with plumber screws of appropriate thickness - I wasn't so convinced of the original. Our ceiling consists of longitudinal floorboards. These are supported by transverse traverse beams at a distance of 40 cm. The total weight of the fan, which weighs more than 8 kilos, is absorbed quite well here. In a concrete ceiling it means dowelling. To be honest, I wouldn't put my trust in just tongue and groove paneling - it just pulls quite a bit of weight down. As I said - the assembly is a bit fiddly - 3 parts (base plate, motor housing with linkage and the base plate covering dome; fluorescent base plate), which have to be plugged into each other and then screwed together. Some of the cables have very small cavities that they have to be fiddled with - this sometimes requires patience until everything has its place. I read in a previous review that the buyer had mounted the rotor blades to the machine housing before mounting it to the ceiling and found this to be better than screwing the rotor blades upside down to the suspended housing. Sure - it may be so, but: Then you have to maneuver the machine housing with the suspension rod and the rotor blades together into the suspension and then maneuver the power supply into the suspension in its place on the base plate - past the rotor blades. You also have to tilt them to hook the linkage into the suspension. I imagine it won't be that easy either. Assembling the base plate, hanging the motor housing with rods, assembling the power pack and making the plug connections, assembling the IR receiver and assembling the dome covering the base plate etc. was a 1-man job. The two of us then assembled the rotor blades: find the centering groove - the second person then holds the rotor blades in the position, builder No. 1 tightens the screws - that works well. The smoothness in the weakest position is great. The effect can already be felt very well here - there is actually no need for it anymore. It's so quiet - I'm sure you could sleep well there. A time switch is unfortunately not implemented - would certainly not be wrong for bedrooms. We're just deducting a star simply because the measurements you have to add down from the ceiling and those you have to add in from the floor because of the bed, mounting above the bed if you don't have a ceiling height of 3 meters, actually not very easy to implement.

Tested review

Ein wenig ausführlicher: Vorbereitung: In der Anleitung wird auf 100kg Traglast in der Decke hingewiesen. Dies scheint mir recht überdimensioniert, da es kaum normale Dübel gibt, die das garantieren. Erst recht nicht in einer Leichtbaudecke. Egal, vernünftige Hohlraumdübel gehen auch. Das Gerät ist an sich ca 8 kg schwer. Also kein Problem. Anbau dauerte ca. eine Stunde (alleine). Aufpassen beim Anbau dass keine Kabel einklemmen, ansonsten ein wenig Fummelei, aber doch recht einfach. Betrieb: Erstes fiel auf, dass das Teil sehr leise ist. Aus den Staaten kenne ich einige Geräte, aber das ist richtig leise. Windzug ist gut spürbar, sogar schon auf der kleinste Stufe. In die zwei E14 Fassungen kamen gleich noch über Alexa steuerbare und dimmbare Leuchtmittel. Kurz eingerichtet und einfach genial. Das Design von dem Propeller ist auch angenehm. Sieht halt nicht altmodisch und kitschig aus wie in Amerika, sondern durch die drei Rotoren sehr modern. Werde demnächst noch mehr bestellen und verbauen.

A little more detailed: Preparation: The instructions refer to 100kg load capacity in the ceiling. This seems to me quite oversized, since there are hardly any normal dowels that guarantee this. Especially not in a lightweight ceiling. It doesn't matter, reasonable cavity dowels also work. The device itself weighs about 8 kg. So no problem. Cultivation took about an hour (alone). When mounting, be careful not to pinch any cables, otherwise it's a bit of fiddling, but it's pretty easy. Operation: The first thing that struck me was that the part is very quiet. I know some devices from the States, but they are really quiet. Draft is clearly noticeable, even on the lowest level. Lights that can be controlled and dimmed via Alexa were installed in the two E14 sockets. Briefly set up and simply brilliant. The design of the propeller is also pleasant. Doesn't look old-fashioned and kitschy like in America, but very modern thanks to the three rotors. Will be ordering and installing more soon.

Tested review

Das Produkt ist, wenn es erst installiert ist, von Funktion bis Design sehr gut und empfehlenswert. Ruhiger und geräuschloser Lauf, gut funktionierende Fernbedienung - alles tadellos. Allerdings haben die Konstrukteure des Deckenventilators etliche grobe Fehler bei den Abmessungen gemacht. Im Prinzip ist die Installation ganz einfach. Aber: es gibt keine Dübel für die Befestigung an der Decke - hier wird ein Deckenbalken vorausgesetzt, keine Betondecke - also 2 Dübel und bessere Schrauben bereit halten; das Loch, in das der IR-Empfänger eingesetzt werden könnte, ist zu klein, so dass der Sensor ein einer sehr weichen Blechlasche angeklebt werden muss und nicht im Loch fetstsitzt, sondern nur mit der Kuppe herausschaut: das Schaltgerät für die Fernbedienung soll in den Baldachin eingebaut werden, für mich nur möglich, als ich Putz von der Decke entfernt habe - und sitzt dann auch nur mangelhaft zur Decke hin. Ein paar Zentimeter mehr im Durchmesser der Glocke oder ein etwas kleineres Steuergerät, das Problem wäre behoben; die Anschlusskabel für die Beleuchtung haben unter der Trägerplatte für die Glühlampen viel zu wenig Platz (dicke Kabelverbinder und Stecker), so dass die Trägerplatte mit Gewalt angeschraubt werden muss und, weil auch sehr weiches Blech, dann ausgerichtet d.h. zurechtgebogen werden muss. Dies alles auf der Leiter mit Überkopf-Montage! Es lohnt sich, für die "einfache Installation" das Tageslicht auszunutzen (sicher 1,5 Stunden) und ein gutes Schweißtuch bereit zu halten. Dann hat man Freude an dem Gerät, wenn man die notwendigen AAA-Batterien für die Fernbedienung zur Hand hat.

Once installed, the product is very good in terms of function and design and is recommended. Quiet and noiseless running, well-functioning remote control - everything is perfect. However, the designers of the ceiling fan made a number of gross errors in the dimensions. In principle, the installation is very simple. But: there are no dowels for fastening to the ceiling - a ceiling beam is required here, not a concrete ceiling - so have 2 dowels and better screws ready; The hole into which the IR receiver could be inserted is too small, so the sensor has to be glued to a very soft sheet metal strap and is not stuck in the hole, but only sticks out with the tip: the switching device for the remote control should go into the Canopy to be installed, was only possible for me when I removed the plaster from the ceiling - and then it only sits poorly towards the ceiling. A few centimeters more in the diameter of the bell or a slightly smaller control unit, the problem would be solved; the connection cables for the lighting have far too little space under the support plate for the light bulbs (thick cable connectors and plugs), so that the support plate has to be screwed on with force and, because it is also very soft sheet metal, then aligned, i.e. bent into shape. All this on the ladder with overhead assembly! It's worth taking advantage of daylight for the "easy installation" (1.5 hours at least) and having a good sweat towel ready. Then you can enjoy the device if you have the necessary AAA batteries for the remote control at hand.

Tested review

Der Ventilator wurde schnell und in absolut stabiler Verpackung versendet. Die Aufbauanleitung ist, wie ich finde, für die Füße... Der Zusammenbau erklärt sich aber von selbst daher nicht tragisch. Da ich eine Gipskartondecke mein Eigen nennen darf und der Ventilator mit fasst 9kg nicht gerade leicht ist habe ich eine Holzplatte (80x60x18) mit 10 Gipskartondübel an die Decke geschraubt und den Ventilator an diese montiert. Das "Verbindungsrohr" zwischen Aufhängung und Motor ist ziemlich lang lässt sich aber mühelos kürzen. Ich habe es um 9cm gekürzt da meine Decke mit 2,3m eher niedrig ist. Auf Stufe LOW (1) hört man den Ventilator überhaupt nicht und er läuft sehr weich ohne Unwucht. Auf Stufe MED (2) kän man die Windgeräusche leicht hören, diese stören aber nicht und er läuft auch hier ohne Unwucht. Auf Stufe HI (3) ist er schon lauter und er fängt leicht an zu "Eiern". Auf Stufe 3 ist der Windstoß aber so arg dass ich diese sowieso nicht verwenden werde weil sich meine Haare um einen Stehplatz streiten. Die Fernbedienung funktioniert tadellos. Wenn man das Licht mit der Fernbedienung einschaltet kann man es mit dem Wandschalter wie gehabt bedienen. Die Rotation aber nur über die Fernbedienung. Alles in allem ein super Teil. Ein Punkt zum meckern habe ich aber auch. Das "Steuergerät" muss bei der Montage mit in die Abdeckschale. Da muss es eine Position geben die ich bisher noch nicht gefunden habe da ich die Schale ums verr...ken nicht in die richtige Stellung bekomme. Auf den Fotos einer anderen Bewertung habe ich gesehen das es aber doch geht :-? Naja das bekommen ich wohl auch noch hin...

The fan was shipped quickly and in absolutely sturdy packaging. The assembly instructions are, in my opinion, for the feet... However, the assembly itself is not tragically self-explanatory. Since I can call a plasterboard ceiling my own and the fan is not exactly light with its 9kg, I screwed a wooden panel (80x60x18) with 10 plasterboard dowels to the ceiling and mounted the fan on it. The "connecting pipe" between the suspension and the engine is quite long but can easily be shortened. I shortened it by 9cm because my ceiling is rather low at 2.3m. At level LOW (1) you don't hear the fan at all and it runs very smoothly without imbalance. At level MED (2) you can hear the wind noise slightly, but this is not disturbing and it also runs without imbalance. At level HI (3) it is already louder and it starts to "ball" easily. At level 3, however, the gust of wind is so bad that I won't use it anyway because my hair is fighting for a place to stand. The remote control works perfectly. If you turn on the light with the remote control, you can operate it with the wall switch as usual. The rotation but only via the remote control. All in all a great part. But I also have one point to complain about. The "control unit" must be included in the cover shell during assembly. There must be a position that I haven't found yet because I can't get the bowl in the right position. On the photos of another review, I saw that it works :-? Well I guess I can get that...

Tested review

Con l'arrivo dell'estate e quindi del caldo non possiamo negare l'esigenza di un ventilatore, magari da soffitto, per rinfrescare le nostre notti insonni. A tutto c'è una soluzione e la tecnologia, come abbiamo imparato nel corso degli anni, ci aiuta praticamente in tutto. Di ventilatori ce ne sono tanti e di tutti i tipi, ma noi di Guide & Recensioni abbiamo avuto l'onore di testare per voi il ventilatore dell'azienda tedesca Klarstein. disponibile all'acquisto sia su amazon che sul sito electronic-star.
Il prodotto che andremo a recensire è il modello "Figo" che non si limita a rinfrescarci nelle giornate più calde dell'estate che sta arrivando, ma svolge anche funzione di lampadario grazie appunto alla plafoniera costituita da 2 lampade da 43W non incluse nella confezione.
Muniamoci quindi di lampadine e scopriamo a questo punto cosa troviamo all'interno della confezione di acquisto.

- Ventilatore da montare, completo di kit di montaggio,
- Telecomando (batterie non incluse)
- Manuale d'istruzione (anche in lingua italiana)

Confezione completa e soprattutto arriva a casa ben protetta grazie agli inserti in polisterolo per proteggere il contenuto da eventuali urti causati dal trasporto.
Tirato fuori dalla confezione, risulta essere sì pesante, come mi aspettavo, ma in un certo senso leggero se paragonato ad altri prodotti simili. Caratterizzato dal design moderno e raffinato, si integra perfettamente con gli arredamenti più moderni e grazie alla forma curva delle tre pale in plastica, l'aspetto complessivo risulta essere piacevole alla vista. Come abbiamo appena detto, le tre pale sono costruite completamente in materiale plastico di colore bianco, anche se sul sito del produttore, oltre che su amazon, è disponibili anche nella colorazione titanio.
Gusti personali a parte, sia che lo scegliate bianco o titanio le foto non rendono la giusta bellezza che trasmette dal vivo.

Stiamo parlando quindi di un accessorio che renderà il vostro arredamento ancora più smart, oltre a rendere più piacevoli le vostre giornate estive e grazie al pratico ma completo telecomando che troviamo nella confezione, alimentato da 2 batterie AAA non incluse, potremo azionare il ventilatore o accendere e spegnere la luce semplicemente premendo gli appositi tasti. Potremo inoltre regolare la velocità di rotazione delle pale o addirittura la direzione. Le velocità sono 3: Bassa, media e alta e basterà premere un tasto per far ruotare le pale in senso orario, in modo da distribuire l'aria calda verso il basso in caso di clima freddo e viceversa.

Le pale XL raggiungono una grandezza complessiva di 52" così da produrre piacevoli correnti d'aria, creando, grazie al ritmico e lieve rumore, un'atmosfera di pieno relax per portare un fresco celestiale direttamente a casa vostra. In questo modo le giornate estive saranno caratterizzate da una freschezza paradisiaca.
Dati tecnici:

• interruttori a catenella per lampada e ventilatore separati e direttamente sul dispositivo
• potenza assorbita ventilatore: 55 W
• senso orario: distribuisce l'aria calda verso il basso in caso di clima freddo
• senso antiorario: produce fresche correnti d'aria in caso di caldo
• lampada con vetro smerigliato
• montatura lampadina: E27
• installazione fisse alla linea di corrente
• alimentazione: 220-240 V~ / 50-60 Hz
• alimentazione telecomando: 2 x batterie AAA (non incluse)

Dimensioni:

• dimensioni: ca. 132 x 40 cm (ØxA)
• diametro lampadario: 20 cm
• peso: ca. 8,5 kg

Dopo averlo testato per bene, il processo di montaggio non richiede particolari doti, in quanto basterà seguire il manuale utente, e devo dire che è complessivamente davvero un ottimo prodotto. Le caratteristiche interessanti sono molteplici, ad esempio potremo utilizzarlo non solo in estate ma anche nelle giornate più fresche, invertendo il senso di rotazione delle pale. Un'altra caratteristica importante che rende completo questo ventilatore è la possibilità di utilizzarlo anche come lampadario, sia contemporaneamente alla funzione ventilatore e sia indipendentemente da questa, controllando e impostando il tutto dal telecomando.

Un accessorio quindi completo, che sarebbe stato ancora più smart se offrisse la possibilità di controllo remoto direttamente dallo smartphone, tramite app dedicata, così da poter impostare anche accensione e spegnimento programmato.
Tuttavia al costo di soli 140 euro circa è una soluzione più che valida ed è per questo che vi consigliamo l'acquisto direttamente da questo link o sul sito ufficiale del rivenditore electronic-star che ringraziamo per averci concesso l'opportunità di provare questo prodotto. Vi invitiamo inoltre a visitare il sito menzionato sopra in quanto sono presenti diverse soluzioni tecnologiche che speriamo di recensire per voi il prima possibile.

With the arrival of summer and therefore the heat, we cannot deny the need for a fan, perhaps a ceiling fan, to refresh our sleepless nights. There is a solution to everything and technology, as we have learned over the years, helps us with practically everything. There are many and all types of fans, but we at Guides & Reviews had the honor of testing the fan from the German company Klarstein for you. available for purchase both on amazon and on the electronic-star website. The product we are going to review is the "Figo" model which not only refreshes us on the hottest days of the upcoming summer, but also acts as a chandelier thanks to the ceiling light made up of 2 43W lamps not included in the package. So let's equip ourselves with light bulbs and find out at this point what we find inside the purchase package. - Fan to be assembled, complete with assembly kit, - Remote control (batteries not included) - Instruction manual (also in Italian) Complete packaging and above all it arrives home well protected thanks to the polysterol inserts to protect the contents from possible knocks caused by transportation. Taken out of the packaging, it appears to be heavy, as I expected, but somewhat light compared to other similar products. Characterized by a modern and refined design, it integrates perfectly with the most modern furnishings and thanks to the curved shape of the three plastic blades, the overall appearance is pleasing to the eye. As we have just said, the three blades are made entirely of white plastic material, even if on the manufacturer's website, as well as on amazon, it is also available in titanium. Personal tastes aside, whether you choose white or titanium, the photos don't convey the right beauty that it conveys live. We are therefore talking about an accessory that will make your furniture even smarter, as well as making your summer days more pleasant and thanks to the practical but complete remote control that we find in the package, powered by 2 AAA batteries not included, we will be able to operate the fan or turn on and turn off the light simply by pressing the appropriate buttons. We will also be able to adjust the rotation speed of the blades or even the direction. There are 3 speeds: Low, medium and high and just press a button to rotate the blades clockwise, in order to distribute the hot air downwards in case of cold weather and vice versa. The XL blades reach an overall size of 52" so as to produce pleasant air currents, creating, thanks to the rhythmic and slight noise, an atmosphere of full relaxation to bring a celestial freshness directly to your home. In this way the summer days will be characterized by a heavenly freshness Technical data: • pull-chain switches for lamp and fan separately and directly on the device • fan power consumption: 55 W • clockwise: distributes warm air downwards in cold weather • counterclockwise : produces fresh air currents in hot weather • lamp with frosted glass • bulb fitting: E27 • fixed installation on the power line • power supply: 220-240 V~ / 50-60 Hz • remote control power supply: 2 x AAA batteries ( not included) Dimensions: • dimensions: about 132 x 40 cm (ØxH) • chandelier diameter: 20 cm • weight: about 8.5 kg After testing it thoroughly, the assembly process does not require any special skills, as it will suffice follow the user manual, and I have to say overall it's a really great product. The interesting features are many, for example we can use it not only in summer but also on cooler days, by reversing the direction of rotation of the blades. Another important feature that makes this fan complete is the possibility of using it as a chandelier, both simultaneously with the fan function and independently of it, controlling and setting everything from the remote control. A complete accessory, therefore, which would have been even smarter if it offered the possibility of remote control directly from the smartphone, via a dedicated app, so as to be able to also set programmed switching on and off. However, at a cost of only around 140 euros it is a more than valid solution and this is why we recommend purchasing it directly from this link or on the official website of the electronic-star reseller whom we thank for allowing us the opportunity to try this product. We also invite you to visit the site mentioned above as there are several technology solutions that we hope to review for you as soon as possible.

Tested review

Der Ventilator kommt mit einer aussagekräftigen Bauanleitung, die in sich äusserst knapp gehalten ist: aber mehr ist auch nicht vonnöten, denn der Ventilator ist tatsächlich mit ein paar Handgriffen zusamengebaut. Ich würde allerdings empfehlen, ihn – entgegen der Anleitung – erst komplett zusammenzubauen und dann in die Halterung einzuhängen: so spart man sich das ständige mühselige über-Kopf-schrauben.

Der Ventilator ist absolut stabil gefertigt und sieht auch sehr formschön aus. Er läuft auf allen drei Stufen sehr ruhig und leise, die Fernbedienung funktioniert einwandfrei und ist auch großzügig gestaltet, so dass man, wenn man den Ventilator bspw. im Halbschlaf im Dunkeln aus- oder niedriger schalten möchte, den passenden Knopf vermutlich sofort „erfühlen“ kann, ohne dabei einen anderen zu erwischen.

Funktionen: wie gesagt, drei Stufen (low-medium-high), das ganze jeweils links- u. rechtsdrehend umstellbar, Beleuchtung.

Fazit: absolute Kaufempfehlung, alleine schon wegen der hervorragenden Beschreibung: ich habe in einem anderen Zimmer einen Ventilator eines anderen Herstellers, der ist zwar genau so stabil, aber die Anleitung hat mich echt Nerven gekostet! Dennoch Vorsicht: Deckenhöhe beachten sowie Abstände zu Wänden. Von der Decke bis zum Lampenende sind es ca. 47 cm, von der Flügelspitze zur Lampenmitte ca. 67 cm. …. wenn’s nicht passt, dann passt’s nicht. Aber da kann der Hersteller ja nichts für …

The fan comes with meaningful assembly instructions, which are extremely brief: but that's all you need, because the fan can actually be assembled in just a few simple steps. However, I would recommend - contrary to the instructions - to first assemble it completely and then to hang it in the holder: this saves you the constant tedious screwing over your head. The fan is absolutely stable and also looks very elegant. It runs very smoothly and quietly on all three levels, the remote control works perfectly and is also generously designed, so that if you want to switch the fan off or lower it when you are half asleep in the dark, for example, you can probably "feel" the right button immediately. can without catching anyone else. Functions: as I said, three levels (low-medium-high), the whole thing can be switched to the left and right, lighting. Conclusion: absolute purchase recommendation, if only because of the excellent description: I have a fan from another manufacturer in another room, which is just as stable, but the instructions really got on my nerves! Nevertheless, be careful: note the ceiling height and distances to the walls. From the ceiling to the end of the lamp it is approx. 47 cm, from the wing tip to the middle of the lamp approx. 67 cm. …. if it doesn't fit, then it doesn't fit. But the manufacturer can't do anything about that...

Show all customer reviews Show fewer customer reviews